Pressure Washing Siding

10 Mistakes People Make When Pressure Washing Siding

When it comes to pressure washing siding, it’s important to be aware of the potential mistakes that can be made. Not only will this help you avoid making these mistakes yourself, but it will also help you better understand the process so you can be sure your contractor is doing the job right. So, without further ado, let’s take a look at 10 common mistakes people make when pressure washing their home’s siding.

It can be a great way to clean and restore the look of your home, but there are a few things you need to keep in mind. Here are 10 mistakes people make when pressure washing siding-read on to find out what they are so you can avoid them!

Pressure Washing Siding
  1. Not protecting your landscaping

When you pressure wash, be sure to protect your landscaping from the high-pressure water by covering it with tarps or plastic sheeting. Otherwise, you run the risk of damaging your plants and grass.

  1. Not starting with a low pressure setting

You should always start with a low pressure setting when pressure washing your siding. This will help avoid damaging the siding while still getting it clean. You can always increase the pressure if needed.

  1. Not using the right nozzle

Using the wrong nozzle can also damage your siding. Be sure to use a nozzle with a wide spray pattern and avoid using a narrow nozzle, which can concentrate the water pressure and damage the siding.

  1. Holding the wand too close to the siding

If you hold the wand too close to the siding, you could end up damaging it. Instead, hold the wand a few inches away from the surface and use long, even strokes.

  1. Moving the wand too fast

Moving the wand too fast will also damage the siding. Be sure to move it slowly and evenly to avoid this.

  1. Not using detergent

If you don’t use detergent, you won’t be able to properly clean the siding. Be sure to add detergent to the pressure washer before you start washing.

  1. Using the wrong detergent

Not all detergents are created equal. Be sure to use a pressure washing specific detergent to avoid damaging the siding.

  1. Not rinsing the siding after washing

Be sure to rinse the siding with clean water after you’re done washing it. This will help remove any leftover detergent and prevent it from damaging the siding.

Pressure Washing Siding
  1. Not letting the siding dry completely before painting

If you’re planning on painting the siding after pressure washing it, be sure to let it dry completely first. Otherwise, the paint will not adhere properly and could start to peel.

  1. Not sealing the siding after painting

Once the siding is dry, be sure to seal it with a high-quality sealant. This will help protect the siding from future damage and keep it looking its best.

Following these simple tips will help you avoid making common mistakes when pressure washing your home’s siding. By taking the time to do it right, you’ll be able to enjoy clean and beautiful siding for years to come.

Shine Window Cleaning
786 Eagle Ridge Trail, Stillwater, MN 55082, United States
+1 651-303-2392

Leave a Reply

Your email address will not be published. Required fields are marked *